They are used to tighten wires and metal cables, and to secure structures and stabilize them to the ground
Big Anchor
Anchors are used to anchor structures and stabilize them to the ground. They are twisted or buried in the soil at the height determined by their size, and other structural elements are connected to the part that stays above ground. They are made in length from 70 to 160 cm depending on the needs of the client and with different thickness of reinforced steel and its welded disk.
Vineyard Anchors
Anchors are used to anchor structures and stabilize them to the ground. They are twisted or buried in the soil at the height determined by their size, and other structural elements are connected to the part that stays above ground. They are made in length from 60 to 120 cm depending on the needs of the client and with different thickness of reinforced steel and its welded disk.
Anchor for Stone Surface Mibu 17
Easy to install anchor, crammed into the ground with a spit. It is completed with a crimped steel cable, the loop of which remains above ground.
Anti-Slip Plate
They are installed at the base of the outer inclined concrete poles, helping to further stabilize them in all directions.
Big U-Shaped Clamps
They are mounted on anchors or on other clamps and are used to tighten steel cables or wire. A hexagon with a hole is inserted into the body of the clamp, into which the rope is placed. It is then manually gripped with a tool and fastened with another element of the clamp – a counter that locks the hexagon back in the direction of its winding. They can be single, double or triple.
Small U-shaped Clamps
They are mounted on anchors or on other clamps and are used to tighten steel cables or wire. A hexagon with a hole is inserted into the body of the clamp, into which the rope is placed. It is then manually gripped with a tool and fastened with another element of the clamp – a counter that locks the hexagon back in the direction of its winding. They can be single, double or triple.
Square Clamps
They are made with the size of the section of our concrete poles – 7×8 and 9×9.5 cm. They are mounted on the poles and serve to tighten the wires along the rows of plantations. A hexagon that is mounted in the clamp can tighten one or more bodies at a time. Another element of the clamp is the counter that locks the hexagon back in the direction of its winding.
U-shaped Clamps
They are used to secure the cables in the upper part of the concrete poles 7×8 or 9×9.5 cm, by tightening the plate with nuts. A rope clamp can also be mounted to the U-shaped clamp.
Concrete Pole Tensioner
It is mounted on the concrete poles 7×8 cm and serves to tighten the wires along the rows of plantations. It can tighten one or more bodies at a time. After tightening the wires it locks with the counter.
Metal Pole Tensioner
It is mounted on the metal poles and serves to tighten the wires along the rows of plantations. It can tighten one or more bodies at a time. After tightening the wires it locks with the counter.
Tightening Clamp for Wooden Poles
It is mounted on wooden poles and serves to tighten the wires along the rows of plantations. It can tighten one or more bodies at a time. After tightening the wires it locks with the counter.
Support Clamp
Захваща се за бетонов кол 7х8, като към него се допира друг такъв, но по-къс и под наклон, за да осигури вертикалното положение на първия , а подпорната скоба не позволява приплъзването им.
Tow-Ear Spring Clamp
It is used in vine plantations, attached to a concrete pole with a pair of wire passing through its openings.
Spring Tensioner
It is used in vineyards, through which the support wires achieve a constantly stretched state. It is attached to a 7/8 concrete pole and the pair of wires is attached to the tensioner by means of gripples. For the rows there are two options available – up to 100 meters and over 100 meters.
Vineyard Clamp with Counter
It is used in vine plantations, attached to a concrete pole with a pair of wire passing through its openings. The counter ensures it is tighten to the pole.
Spacer Clamp for Concrete Poles
It is used in vineyards with a pair of wire passing through its openings, and the distance between them can be adjusted.
Spacer Clamp for Metal Poles
They are used in vineyards of metal poles. They are able to fasten and unfasten.
Clamp for wooden poles
Fastening clamp for a pair of wires in the vineyards, which is attached to a wooden pole.
Single Spring Clamps
They serve to attach the wire to a concrete pole.
Clamps for Drip Irrigation
They attach to the main wire in the row and their function is to “hold” the drip irrigation hose.
Tightening Clamps F
It tightens wire in rows, manually wrapping it on the clamp and locking it.
S-shaped Clamps
It serves as a connection between a claw, retaining net and wire, providing the outstretched position of the net at the end rows in anti-hail systems.
Clamps for Individual Poles
Holds an individual pole in the ground at its upper end for the main wire.
Clone Clamp
Rope Clamps
They connect steel cables to each other or to another element with a circular cross section. Available in different sizes, according to the thickness of the connected elements.